Low temperature valve

Column:Technical support Time:2023-10-27
shared:
Model: DZ41Y
Nominal: PN1.6 ~ 2.5Mpa
Nominal diameter: DN15 ~ 800mm


An overview of low temperature valve

There are two kinds of low-temperature valve cover design. The first is a bolt-type bonnet, according to this design of the valve, the valve body and the valve cap bolts and nuts, wound gasket (316 clip flexible graphite). Customers can also use special metal ring connection. The second design is welded bonnet, according to this design of the valve, the valve body and the valve cap screwed, all-welded seal. Customers have special requirements can also be used when welding penetration.